HP 7000 dl Router manual Frame-relay slot/port, Enable #show bridge

SROS Command Line Interface Reference Guide Enable Mode Command Set

show bridge [ethernet frame-relay ppp vlan] <slot/port> <bridge group #>

Use the show bridge command to display a list of all configured bridge groups (including individual members of each group). Enter an interface or a bridge number to display the corresponding list.

Syntax Description

ethernet <slot/port>	Optional. Display all bridge groups associated with the Ethernet interface.
frame-relay <slot/port>	Optional. Display all bridge groups associated with the Frame Relay virtual
	interface.
ppp <slot/port>	Optional. Display all bridge groups associated with the PPP virtual interface.
vlan <slot/port>	Optional. Displays all bridge groups associated with the VLAN interface.
<bridgegroup#>	Display a specific bridge group

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is a sample output from the show bridge command:

>enable

#show bridge

Total of 300 station blocks 295 free
Address	Action	Interface	Age	Rx Count	Tx Count
00:04:51:57:4D:5A	forward	eth 0/1	0	7133392	7042770
00:04:5A:57:4F:2A	forward	eth 0/1	0	402365	311642
00:10:A4:B3:A2:72	forward	eth 0/1	4	2	0
00:A0:C8:00:8F:98	forward	eth 0/1	0	412367	231
00:E0:81:10:FF:CE	forward	fr 1.17	0	1502106	1486963

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 107