Chapter 3 Initial Configuration

Configuring CPU Switch Module Redundancy

Configuring Privileged EXEC Mode Access on the Standby CPU Switch Module

Access to privileged EXEC mode from the standby CPU switch module CLI can be enabled from the active CPU switch module CLI. This feature provides extra security for the Cisco ONS 15530 system.

To configure access to privileged EXEC mode on the standby CPU switch module, perform the following steps on the active CPU switch module CLI, beginning in global configuration mode:

 

Command

Purpose

Step 1

 

 

Switch(config)# redundancy

Enters redundancy configuration mode.

 

Switch(config-red)#

 

Step 2

 

 

Switch(config-red)#standby privilege-mode

Enables access to privileged EXEC mode from the

 

enable

standby CPU switch module CLI. The default state

 

 

is disabled.

 

 

 

Example

The following example shows how to configure redundancy maintenance mode:

Switch(config)# redundancy

Switch(config-red)#standby privilege-mode enable

Displaying the Standby CPU Switch Module Privileged EXEC Mode Status

To display the privileged EXEC mode access status on the standby CPU switch module, use the following privileged EXEC command:

Command

Purpose

 

 

show redundancy summary

Displays the redundancy configuration and status.

 

 

 

Cisco ONS 15530 Configuration Guide and Command Reference

3-24

78-16019-02, Cisco IOS Release 12.2(18)SV2

Page 24
Image 24
Cisco Systems 78-16019-02 manual Switchconfig-red# standby privilege-mode, Enables access to privileged Exec mode from