HP 7000 dl Router Show interfaces shdsl, Performance statistics, Performance-statistics, Version

SROS Command Line Interface Reference Guide Enable Mode Command Set

show interfaces shdsl

Use the show interfaces shdsl command to display configuration parameters and current statistics for the SHDSL interfaces (or a specified interface).

Variations of this command include the following:

show interfaces shdsl <slot/port>

show interfaces shdsl <slot/port> performance-statistics

show interfaces shdsl <slot/port> performance-statistics total-24-hour show interfaces shdsl <slot/port> performance-statistics <x-y>show interfaces shdsl <slot/port> version

Syntax Description

performance statistics	Optional. Displays the current 15-minute interval, the current 24-hour totals, and
	all 96 stored intervals.
performance-statistics	Optional. Displays the current 24-hour totals and the past seven 24-hour
total-24-hour	intervals.
performance-statistics	Shows the current 15-minute interval, the current 24-hour totals, and all intervals
<x-y>	from x through y. This command is basically the same thing as the
	performance-statisticscommand with the added function of allowing you to
	specify a particular interval (or range of intervals) to display rather than displaying
	all 96.
	Note: If you wish to display the 24th interval, enter show interface shdsl 1/1
	performance-statistics 24-24. Entering show interface shdsl 1/1
	performance-statistics 24 results in displaying the 24-hour statistics. Any
	number other than 24 (between 1 and 96) results in the correct display of the
	selected interval (e.g., show interface shdsl 1/1 performance-statistics 4
	shows the 4th interval).
version	Optional. Displays current version information (e.g., model and list number,
	software version, etc.) for the SHDSL interface.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 136