HP 7000 dl Router manual Frame-relay intf-type type, Dce

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set

frame-relay intf-type <type>

Use the frame-relayintf-typecommand to define the Frame Relay signaling role needed for the endpoint. Use the no form of this command to return to the default value.

Syntax Description

<type>	Specifies the Frame Relay interface types as DTE, DCE, or NNI
dce	DCE or Network signaling role. Use this interface type when you need the unit to
	emulate the frame switch.
dte	DTE or User signaling role. Use this interface type when connecting to a Frame
	Relay switch (or piece of equipment emulating a frame switch).
nni	Configures the interface to support both network and user signaling (DTE or DCE)
	when necessary.

Default Values

<type>dte

Command Modes

(config-fr 1)# Virtual Frame Relay Interface Configuration Mode required

Usage Examples

The following example configures the Frame Relay endpoint for DCE signaling:

(config)#interface frame-relay 1 (config-fr1)#frame-relay intf-type dce

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 571