HP 7000 dl Router manual Auto-cost reference-bandwidth rate

Router (OSPF) Configuration Command Set

auto-cost reference-bandwidth <rate>

Use the auto-costreference-bandwidthcommand to assign a different interface cost to an interface. It may be necessary to assign a higher number to high-bandwidth links. This value is used in OSPF metric calculations.

Syntax Description

<rate> Set the default reference-bandwidth rate (range: 1-4294967 Mbps).

Default Values

By default, the rate is set to 100.

Command Modes

(config-ospf)# Router (OSPF) Configuration Mode required

Usage Examples

The following example sets the auto cost reference-bandwidth to 1000 Mbps:

(config)#router ospf

(config-ospf)#auto-cost reference-bandwidth 1000

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 907