SROS Command Line Interface Reference Guide

Enable Mode Command Set

 

 

show output-startup

Use the show output-startupcommand to display startup configuration output line-by-line. This output can be copied into a text file and then used as a configuration editing tool.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

#

Enable Command Mode

Usage Examples

The following is a sample output from the show output-startupcommand:

>enable

#show output-startup

!

#!

#hostname "UNIT_2"

UNIT_2#no enable password UNIT_2#!

UNIT_2#ip subnet-zero UNIT_2#ip classless UNIT_2#ip routing UNIT_2#! UNIT_2#event-history on UNIT_2#no logging forwarding

UNIT_2#logging forwarding priority-level info UNIT_2#no logging email

etc....

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

175

Page 175
Image 175
HP 7000 dl Router manual Show output-startup, #show output-startup