HP 7000 dl Router manual Timers spf delay hold, Config#router ospf config-ospf#timers spf 10

Router (OSPF) Configuration Command Set

timers spf <delay> <hold>

Use the timers spf command to configure the shortest path first (SPF) calculation and hold intervals.

Syntax Description

<delay>	Time in seconds between OSPF’s receipt of topology changes and the beginning
	of SPF calculations.
<hold>	Time in seconds between consecutive SPF calculations. Range: 10-1800
	seconds.

Default Values

<delay>	5 seconds
<hold>	10 seconds

Command Modes

(config-ospf)# Router (OSPF) Configuration Mode required

Usage Examples

The following example defines a delay of 10 seconds and a hold-time of 30 seconds:

(config)#router ospf (config-ospf)#timers spf 10 30

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 916