HP 7000 dl Router manual End

Common Commands

end

Use the end command to exit the current Configuration Mode and enter the Enable Security Mode.

Note	When exiting the Global Configuration Mode, remember to perform a copy running-config
	startup-configto save all configuration changes.

Syntax Description

No subcommands.

Default Values

No defaults necessary for this command.

Command Modes

This command is valid for all command modes except the Enable Security Mode.

Usage Examples

The following example shows the end command being executed in the T1 Configuration Mode:

(config-t1 1/1)#end

#

#- Enable Security Mode command prompt

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 929