HP 7000 dl Router manual Debug ip dhcp-server, Enable #debug ip dhcp-server

SROS Command Line Interface Reference Guide Enable Mode Command Set

debug ip dhcp-server

Use the debug ip dhcp-servercommand to activate debug messages associated with DHCP server operation in the Secure Router OS. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the Secure Router OS are disabled.

Command Modes

# Enable Command Mode

Functional Notes

The debug ip dhcp-servercommand activates debug messages to provide information on DHCP server activity in the Secure Router OS. The Secure Router OS DHCP server capability allows the Secure Router OS to dynamically assign IP addresses to hosts on the network.

Usage Examples

The following example activates debug messages associated with DHCP server activity:

>enable

#debug ip dhcp-server

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 78