SROS Command Line Interface Reference GuideEnable Mode Command Set

show queue [atm <interface id> frame-relay <interface id> ppp

<interface id>]

Use the show queue command to display conversation information associated with an interface queue. This command shows summary and per-conversation information.

Syntax Description

<interface id>

Specifies the numerical virtual Frame Relay interface or PPP identifying label.

Default Values

No default value necessary for this command.

Command Modes

#

Enable Command Mode

Usage Examples

The following is a sample output from the show queue command:

>enable

#show queue fr 1

Queueing method: weighted fair

Output queue: 18/25/200/64/1027 (size/highest/max total/threshold/drops)

Conversations 2/4/256 (active/max active/max total)

(depth/weight/highest/discards) 12/256/33/0 Conversation 10, linktype: ip, length: 67

source: 10.100.23.11, destination: 10.200.2.125, id: 0x0000, ttl: 47,

TOS: 0 prot: 17 (udp), source port 99, destination port 99

(depth/weight/highest/discards) 6/256/25/0 Conversation 23, linktype: ip, length: 258

source: 10.100.23.11, destination: 10.200.2.125, id: 0x0000, ttl: 47,

TOS: 0 prot: 6 (tcp), source port 16, destination port 16

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

182

Page 182
Image 182
HP 7000 dl Router manual Show queue atm interface id frame-relay interface id ppp, Interface id, Enable #show queue fr