HP 7000 dl Router manual Stopbits option, Config#line console 0 config-con 0#stopbits

SROS Command Line Interface Reference Guide Line (Console) Interface Config Command Set

stopbits <option>

Use the stopbits command to set the number of stopbits per character for a terminal session. This value must match the configuration of your VT100 terminal or terminal emulator software. The default is 1 stopbit per character. Use the no form of this command to return to the default value.

Syntax Description

<option>	Specifies the number of stopbits per character
1	1 stopbit
2	2 stopbits

Default Values

<option>1

Command Modes

(config-con 0)# Console Interface Configuration Mode required

Usage Examples

The following example configures 2 stopbits per character for the console terminal session:

(config)#line console 0 (config-con 0)#stopbits 2

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 886