HP 7000 dl Router manual Certificate ca serial-number, Config-cert-chain#no certificate ca

SROS Command Line Interface Reference Guide Certificate Configuration Command Set

certificate ca <serial-number>

Use the certificate ca command to restore a CA certificate. Use the no form of this command to remove a specific certificate from the certificate chain for a CA.

Syntax Description

<serial-number>	Enter the certificate’s serial number (up to 51 characters). This value can be found
	for existing certificates by using the show run command.

Default Values

No defaults necessary for this command.

Command Modes

(config-cert-chain)# Certificate Configuration

Functional Notes

The user typically does not enter this command. It is primarily used to restore certificates from startup-config when the product is powered up.

Usage Examples

The following example removes the CA certificate with the serial number 0712:

(config-cert-chain)#no certificate ca 0712

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 431