8SIP Specific Configuration
2.2 Configuring DECT System
When configuring the KWS600v3 in a SIP environment it is necessary to enable the check boxes; Enbloc Dialing and DTMF through RTP channel.
1Under the Configuration menu, click DECT, and then click System.
Figure 2 Adm. Page: Configuration/DECT/System page - SIP Protocol
2Select the Enbloc Dialing check box.
The Enbloc Dialing check box has to be enabled in a SIP configuration in order for the handset to collect all digits, before passing them on to a call handler for routing.
3Select the DTMF check box.
The DTMF check box has to be enabled in a SIP configuration if DTMF tones are needed (optional).
4Click OK.
5Click Reset (under Administration menu) to save your configuration.
2.3Configuring Call Waiting
To enable the Call Waiting feature in the system, you must do the following:
14168600, Ed.2
