7
Chapter 2 SIP Specific Configuration
This section describes how to configure the KIRK Wireless Server 600v3 when using SIP Protocol. It only describes specific configuration procedures in connection with the SIP Protocol.
For detailed information about installing and configuring the KWS600v3 in general, refer to the KIRK Wireless Server 600v3 Installation and Configuration Guide.
For information about accessing the web based Administration Page of the KIRK Wireless Server 600v3, refer to the KIRK Wireless Server 600v3 Installation and Configuration Guide.
This section contains information about:
•“Configuring DECT Master” on page 7
•“Configuring DECT System” on page 8
•“Configuring Call Waiting” on page 8
2.1Configuring DECT Master
When configuring the KWS600v3 in a SIP environment it is necessary to type a gatekeeper ID.
1Under the Configuration menu, click DECT, and then click Master.
Figure 1 Adm. Page: Configuration/DECT/Master page - SIP Protocol
2In the
An example of a domain name could be: sip:kirk323.kirktelecom.com.net:5060. Contact your system administrator for more information.
3Click OK.
4Click Reset (under Administration menu) to save your configuration.
KWS600v3