5
Chapter 1 Preface
This guide describes the specific configuration of a KIRK Wireless Server 600v3 (KWS600v3) when using SIP Protocol. The guide is intended for qualified technicians who will install, register and configure a KWS600v3 in a SIP environment. To qualify to install the KWS600v3 Solution, you must have successfully completed the KWS600v3 technical training.
The user guide also provides you with information about:
•KIRK Wireless Server 600v3
•Web based Adminstration Page of the KIRK Wireless Server 600v3
1.1Before You Begin
This guide assumes the following:
•that users have a working knowledge of the call handlers operation
•that the call handler is installed and initialized and is working correctly
•that users have a working knowledge of the KIRK Wireless Server 600v3
•that users have a working knowledge of the web based Administration Page
•that users are familiar with the KIRK Wireless Server 600v3 Installation and Configuration Guide
1.2Chapter Overview
Where is it? | What is it about? | When to use it? |
|
|
|
Chapter 2 | SIP Specific Configuration | To learn how to configure a KWS600v3 in a SIP |
|
| environment. |
1.3 Related Documentation
For further information about the system components not covered by this manual, refer to the following documentation:
Subject
Documentation
KIRK Wireless Server 600v3
Installation and Configuration Guide
KWS600v3 Configuration Guide (SIP Protocol)
