HP 7000 dl Router manual Ip rip receive version 1

Command Reference Guide Tunnel Configuration Command Set

ip rip receive version [1 2]

Use the ip rip receive version command to configure the RIP version the unit accepts in all RIP packets received on the interface. Use the no form of this command to restore the default value.

Syntax Description

1	Only accept received RIP version 1 packets on the interface.
2	Only accept received RIP version 2 packets on the interface.

Default Values

By default, all interfaces implement RIP version 1 (the default value for the version command).

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: Ethernet (eth 0/1), PPP virtual interfaces (ppp 1), HDLC
	virtual interfaces (hdlc 1), Frame Relay virtual sub-interfaces (fr 1.20), tunnel
	interfaces (tunnel 1), and VLAN interface (vlan 1).

Functional Notes

Use the ip rip receive version command to specify a RIP version that overrides the version (in the Router RIP) configuration. See version <version> on page 902 for more information.

The SROS only accepts one version (either 1 or 2) on a given interface.

Usage Examples

The following example configures the tunnel interface to accept only RIP version 2 packets:

(config)#interface tunnel 1 (config-tunnel 1)#ip rip receive version 2

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 800