HP 7000 dl Router manual Vlan-id vlan id native, Native

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

vlan-id <vlan id> [native]

Use the vlan-idcommand to set a VLAN ID for the Ethernet subinterface. Use the no form of this command to remove an entry.

Syntax Description

<vlan id>	Enter a valid VLAN interface ID number (1-4095).
native	Optional. Specifies that data for that VLAN ID goes out untagged. If native is not
	specified, data for that VLAN ID goes out tagged.

Default Values

By default, no VLAN ID is set.

Command Modes

Ethernet Interface Configuration Modes

Usage Examples

The following example configures a native VLAN of 5 for the Ethernet sub-interface:

(config-eth 0/1.1)#vlan-id 5 native

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 485