HP 7000 dl Router manual Copyright 2005 Hewlett-Packard Development Company, L.P 838

SROS Command Line Interface Reference Guide HDLC Command Set

ip rip send version [1 2]

Use the ip rip send version command to configure the RIP version the unit sends in all RIP packets transmitted on the interface. Use the no form of this command to restore the default value.

Syntax Description

1	Only transmits RIP version 1 packets on the interface.
2	Only transmits RIP version 2 packets on the interface.

Default Values

By default, all interfaces transmit RIP version 1 (the default value for the version command).

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual
	HDLC interfaces (hdlc 1), virtual Frame Relay sub-interfaces (fr 1.20), tunnel
	interfaces (tunnel 1), and VLAN interface (vlan 1).

Functional Notes

Use the ip rip send version command to specify a RIP version that overrides the version (in the Router RIP) configuration. See version <version> on page 902 for more information.

The SROS only transmits one version (either 1 or 2) on a given interface.

Usage Examples

The following example configures the HDLC interface to transmit only RIP version 2 packets:

(config)#interface hdlc 1 (config-hdlc 1)#ip rip send version 2

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 838