HP 7000 dl Router manual Ip-rangestart ip end ip, Config-ike-client-pool#ip-range 172.1.1.1

SROS Command Line Interface Reference Guide IKE Client Command Set

ip-range<start ip> <end ip>

Use the ip-rangecommand to specify the range of addresses from which the router draws when assigning an IP address to a client.

Syntax Description

<start ip>	The first IP address in the range for this pool.
<end ip>	The last IP address in the range for this pool.

Default Values

By default, no IP address range is defined.

Command Modes

(config-ike-client-pool)# IKE Client Configuration Mode

Usage Examples

The following example defines an IP address range for this configuration pool:

(config-ike-client-pool)#ip-range 172.1.1.1 172.1.1.25

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 394