HP 7000 dl Router manual Snmp-server host address traps community trap type

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

snmp-server host <address> traps <community> <trap type>

Use the snmp-server host traps command to specify traps sent to an identified host. Use multiple snmp-server host traps commands to specify all desired hosts. Use the no form of this command to return to the default value.

Syntax Description

<address>	Specifies the IP address of the SNMP host that receives the traps.
<community>	Specifies the community string (used as a password) for authorized agents to
	obtain access to SNMP information.
<trap type>	Optional. Specifies the type of notification trap to enable. Leaving this option blank
	enables ALL system traps.
snmp	Enables a subset of traps specified in RFC 1157.
	The following traps are supported:
	coldStart
	warmStart
	linkUp
	linkDown
	authenticationFailure

Default Values

By default, there are no hosts or traps enabled.

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example sends all SNMP traps to the host at address 190.3.44.69 and community string My Community:

(config)#snmp-server host 190.3.44.69 traps My Community snmp

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 338