HP 7000 dl Router manual Redistribute static, Config#router ospf config-ospf#redistribute static

Router (OSPF) Configuration Command Set

redistribute static

Use the redistribute static command to advertise routes from one protocol to another. Using the static keyword allows the advertisement of static routes into the OSPF routing protocol. This will advertise all static routes on OSPF-enabled interfaces. It does not enable OSPF on all interfaces. Use the no form of this command to disable the propagation of the specified route type.

Syntax Description

static	Optional keyword that specifies the Secure Router OS to import static routes into
	OSPF.

Default Values

By default, this command is disabled.

Command Modes

(config-ospf)# Router (OSPF or RIP) Configuration Mode required

Functional Notes

Redistributing static routes imports those routes into OSPF without the interfaces in question actually participating in OSPF. The static routes imported this way are not covered by a network command and therefore do not send/receive OSPF traffic.

Usage Examples

The following example imports static routes into OSPF:

(config)#router ospf (config-ospf)#redistribute static

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 913