SROS Command Line Interface Reference Guide

ATM Sub-Interface Config Command Set

 

 

encapsulation [aal5mux aal5snap]

Use the encapsulation command to configure the encapsulation type for the ATM adaption Layer (AAL) of the ATM Protocol Reference Model.

Variations of this command include the following:

encapsulation aal5mux [ip ppp] encapsulation aal5snap

Syntax Description

aal5mux

Encapsulation type for multiplexed virtual circuits. A protocol must be specified.

aal5snap

Encapsulation type that supports LLC/SNAP protocols.

[ip ppp]

Protocol type used for multiplexed virtual circuits (aal5mux).

Default Values

By default, the encapsulation type is aal5snap.

Command Modes

(config-atm 1.1)# ATM Sub-Interface Configuration Mode required

Functional Notes

For PPP and PPoE, the encapsulation type can be aal5snap or aal5mux ppp. For IP with no bridging, the encapsulation type can be aal5snap or aal5mux ip. For IP with bridging, the encapsulation type can only be aal5snap

For bridging, the encapsualtion type can only be aal5snap.

Usage Examples

The following example sets the encapsulation type to all5snap:

(config-atm 1.1)#encapsulation aal5snap

5991-2114

© Copyright 2005 Hewlett-Packard Development Company, L.P.

666

Page 666
Image 666
HP 7000 dl Router manual Encapsulation aal5mux aal5snap, Encapsulation aal5mux ip ppp encapsulation aal5snap