HP 7000 dl Router manual Invert etclock, Config#interface serial 1/1

SROS Command Line Interface Reference Guide Serial Interface Configuration Command Set

invert etclock

Use the invert etclock command to configure the serial interface to invert the External Transmit (reference clock) in the data stream before transmitting. Use the no form of this command to return to the default value.

Syntax Description

No subcommands.

Default Values

By default, the serial interface does not invert etclock.

Command Modes

(config-ser 1/1)# Serial Interface Configuration Mode

Functional Notes

If the serial interface cable is long, causing a phase shift in the data, the et clock can be inverted using the invert etclock command. This switches the phase of the clock, which compensates for a long cable.

Usage Examples

The following example configures the serial interface to invert etclock:

(config)#interface serial 1/1

(config-ser 1/1)#invert etclock

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 497