HP 7000 dl Router manual Enable #show interfaces shdsl 1/1

SROS Command Line Interface Reference GuideEnable Mode Command Set

Functional Notes

Loop Attenuation	Shows the current, minimum, and maximum loop attenuation of the line.
	These may be cleared using the clear counters shdsl <slot/port>
	command.
Performance Stats	Shows current interval line statistics. These statistics may be cleared
	through the use of the clear counters shdsl <slot/port> command, but
	the number of elapsed seconds will continue running and accumulating
	time.

Usage Examples

The following is sample output from the show interfaces shdsl command:

>enable

#show interfaces shdsl 1/1

shdsl 1/1 is UP, line protocol is DOWN Encapsulation FRAME-RELAY IETF (fr 1) Equipment type is cpe

Line rate is 2056kbps No alarms.

SHDSL training complete. EOC is up. No local loopbacks, No remote loopbacks

SNR margin is 18dB currently, 15dB minimum, 30dB maximum Loop attenuation is 1dB currently, 1dB minimum, 1dB maximum

Current 15-minute performance statistics (115 seconds elapsed): 0 code violations, 0 loss of sync word seconds

0 errored seconds, 0 severely errored seconds

0 unavailable seconds

Packet Statistics:

0 packets input, 0 bytes, 0 no buffer

0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame

0 abort, 0 ignored, 0 overruns

32 packets output, 0 bytes, 0 underruns

0 input clock glitches, 0 output clock glitches

0 carrier lost, 0 cts lost

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 138