HP 7000 dl Router manual Description

Common Commands

description

Use the description command as a comment line to enter an identifier for the specified interface (for example, circuit ID, contact information, etc.).

Syntax Description

Limited to 80 alphanumeric characters.

Default Values

No defaults required for this command.

Command Modes

Any Configuration Mode.

Usage Examples

The following example enters comment information using the description command:

(config)#interface t1 1/1

(config-t1 1/1)#description This is the Dallas office T1

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 927