HP 7000 dl Router manual Redistribute static metric value, Static

Router (RIP) Configuration Command Set

redistribute static [metric <value>]

Use the redistribute static command to pass routes from one network to another, regardless of the routing protocol implemented on the routing domain. Using the static keyword allows the propagation of static routes to other interfaces using the RIP routing protocol. Use the no form of this command to disable the propagation of the specified route type.

Note	The gateway network for the static route must participate in RIP by using the network
	command for the gateway network.
Syntax Description
static		Optional keyword that specifies the Secure Router OS to only propagate static
		routes to other networks
metric <value>		Optional. Specifies the hop count to use for advertising redistributed OSPF routes in
		RIP

.

Default Values

By default, RIP is not enabled.

Command Modes

(config-rip)# Router (RIP or OSPF) Configuration Mode required

Functional Notes

Redistributing static routes allows other network devices to learn about paths (not compatible with their system) without requiring manual input to each device on the network.

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 901