HP 7000 dl Router manual Encapsulation 802.1q

SROS Command Line Interface Reference Guide Ethernet Interface Configuration Command Set

encapsulation 802.1q

Use the encapsulation 802.1q command to put the interface into 802.1q (VLAN) mode.

Syntax Description

No subcommands.

Default Values

No default value is necessary for this command.

Command Modes

Ethernet Interface Configuration Modes

Functional Notes

When operating on a circuit that is providing timing, setting the clock source to line can avoid errors such as Clock Slip Seconds (CSS).

Usage Examples

The following example puts interface eth 0/1 in 802.1q mode and configures a sub-interface for vlan usage:

(config)#interface ethernet 0/1 (config-eth 0/1)#encapsulation 802.1q (config-eth 0/1)#interface ethernet 0/1.1 (config-eth0/1.1)vlan-id 3

(config-eth 0/1)#Ethernet Interface Configuration Mode required

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 447