HP 7000 dl Router manual Show pppoe, #show pppoe ppp

SROS Command Line Interface Reference Guide Enable Mode Command Set

show pppoe

Use the show pppoe command to display all pppoe settings and associated parameters.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example enters the Enable Command Mode and uses the show command to display pppoe information:

>enable

#show pppoe ppp 1

Outgoing Interface: eth 0/1

Outgoing Interface MAC Address: 00:A0:C8:00:85:20

Access-Concentrator Name Requested: FIRST VALID

Access-Concentrator Name Received: 13021109813703-LRVLGSROS20W_IFITL

Access-Concentrator MAC Address: 00:10:67:00:1D:B8

Session Id: 64508

Service Name Requested: ANY
Service Name Available:
PPPoE Client State: Bound (3)
Redial retries:	unlimited
Redial delay:	10 seconds
Backup enabled all day on the following days:
Sunday Monday Tuesday Wednesday Thursday Friday Saturday
Backup phone number list:
Number	Call Type	min/max DS0s Backup I/F
5551212	analog	1/1	ppp 2

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 177