HP 7000 dl Router manual Show processes cpu, Enable #show processes cpu

SROS Command Line Interface Reference Guide Enable Mode Command Set

show processes cpu

Use the show processes cpu command to display information regarding any processes that are currently active.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is a sample output from the show processes cpu command:

>enable

#show processes cpu

processes cpu
System load: 7.07% Min: 0.00% Max 85.89%
Context switch load: 0.21%
Task	Task			Invoked	Exec Time	Runtime	Load %
Id	Name	PRI STAT		(count)	(usec)	(usec)	(1sec)
0	Idle	0	W	129689	1971	927923	92.79
1	FrontPanel	249	W	9658	165	3202	0.32
3	Stack Usage	11	W	485	305	325	0.03
4	Q Test 1	10	W	50	4	0	0.00
5	Q Test 2	11	W	50	6	0	0.00
10	Clock	20	W	1443	24	55	0.01
11	PacketRouting	250	W	31656	10	3871	0.39
12	Thread Pool	50	W	161	159	0	0.00
13	IKE	10	W	2	341	0	0.00
14	RouteTableTick	50	W	49	874	874	0.09
....etc.

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 178