HP 7000 dl Router manual Show event-history, Enable #show event-history

SROS Command Line Interface Reference Guide Enable Mode Command Set

show event-history

Use the show event-historycommand to display all entries in the current local event-history log.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The event history provides useful information regarding the status of the system and individual port states. Use the event history as a troubleshooting tool when identifying system issues. The following is a sample event history log.

>enable

#show event-history

Using 526 bytes

2002.07.12 15:34:01 T1.t1 1/1 Yellow

2002.07.12 15:34:01 INTERFACE_STATUS.t1 1/1 changed state to down. 2002.07.12 15:34:02 T1.t1 1/1 No Alarms

2002.07.12 15:34:02 INTERFACE_STATUS.t1 1/1 changed state to up. 2002.07.12 15:34:03 INTERFACE_STATUS.eth 0/1 changed state to up. 2002.07.12 15:34:10 OPERATING_SYSTEM Warm Start 2002.07.12 15:34:12 PPP.NEGOTIATION LCP up

2002.07.12 15:34:12 PPP.NEGOTIATION IPCP up

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 124