HP 7000 dl Router manual Ip snmp agent, Config#ip snmp agent

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

ip snmp agent

Use the ip snmp agent command to enable the Simple Network Management Protocol (SNMP) agent.

Syntax Description

No subcommands.

Default Values

By default, the SNMP agent is disabled.

Command Modes

(config)# Global Configuration Mode required

Functional Notes

Allows a MIB browser to access standard MIBs within the product. This also allows the product to send traps to a trap management station.

Usage Examples

The following example enables the IP SNMP agent:

(config)#ip snmp agent

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 304