HP 7000 dl Router manual Info, Config#logging forwarding priority-level warning

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

logging forwarding priority-level [error fatal info notice warning]

Use the logging forwarding priority-levelcommand to set the threshold for events sent to the configured syslog server specified using the logging forwarding receiver-ipcommand. All events with the specified priority or higher will be sent to all configured syslog servers. See logging email priority-level [error fatal info notice warning] on page 315 for more information. Use the no form of this command to return to the default priority.

Syntax Description

Sets the minimum priority threshold for sending messages to the syslog server specified using the logging forwarding receiver-ipcommand.

The following priorities are available (ranking from lowest to highest):

Info

When selected, all events are logged.

Notice

When selected, events with notice, warning, error, and fatal priorities are logged.

Warning

When selected, events with warning, error, and fatal priorities are logged.

Error

When selected, events with error and fatal priorities are logged.

Fatal

When selected, only events with a fatal priority are logged.

Default Values

<priority>warning

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example sends all messages with warning level or greater to the syslog server listed using the logging forwarding receiver-ipcommand.

(config)#logging forwarding priority-level warning

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 321