HP 7000 dl Router manual Fair-queue threshold, Config#interface frame-relay

SROS Command Line Interface Reference Guide Frame Relay Interface Config Command Set

fair-queue <threshold>

Use the fair-queuecommand to enable weighted fair queuing (WFQ) on an interface. Use the no form of this command to disable WFQ and enable FIFO (first-in-first-out) queueing for an interface. WFQ is enabled by default for WAN interfaces.

Syntax Description

<threshold>	Optional value that specifies the maximum number of packets that can be present
	in each conversation sub-queue. Packets received for a conversation after this
	limit is reached are discarded. Range: 16 to 512.

Default Values

By default, fair-queue is enabled with a threshold of 64 packets.

Command Modes

(config-interface)#	Interface Configuration Mode
	Valid interfaces include: virtual PPP (ppp 1) and virtual Frame Relay interfaces
	(fr 1)

Usage Examples

The following example enables WFQ on the interface with a threshold set at 100 packets:

(config)#interface frame-relay 1

(config-fr 1)#fair-queue 100

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 570