HP 7000 dl Router manual Logging email sender

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

logging email sender

Use the logging email sender command to specify the sender in an outgoing email message. This name will appear in the From field of the receiver’s inbox. Use the no form of this command to disable this feature.

Syntax Description

No subcommands.

Default Values

No default value is necessary for this command.

Command Modes

(config-int)# Interface configuration mode

Usage Examples

The following example sets a sender for outgoing messages: (config)#logging email sender myUnit@myNetwork.com

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 317