PROGRAM SCAN
Program Scan is identical to VFO Scan except that you select the frequency range of the scan.
1 s |
9
■Setting Scan Limits
You can store up to 10 scan ranges in memory channels L0/U0 to L9/U9.
1 Select your desired band.
2 Press [VFO].
3 Select your desired frequency for the lower limit.
4Press [F].
• A memory channel number appears and blinks.
5Turn the Tuning control, or press Mic [UP]/ [DWN], to select a channel (L0 ~ L9).
6Press [M.IN].
• The lower limit is stored in the channel.
7Select your desired frequency for the upper limit.
8Press [F].
9Turn the Tuning control, or press Mic [UP]/ [DWN], to select a matching channel (U0 ~ U9).
•For example, if you have selected L3 for the lower limit in step 5, select U3 for the upper limit.
10Press [M.IN].
• The upper limit is stored in the channel.
To confirm the stored scan limits, press [MR], then select the L and U channels.
Note:
◆The lower limit must have a lower frequency than the upper limit.
◆The lower and upper frequency step sizes must be the same.
◆The lower and upper frequency limits must be selected on the same band.
50
