PROGRAMMABLE MEMORY (PM)
Programmable Memory (PM) stores virtually all settings currently set on the transceiver. This transceiver provides 5 PM channels to store 5 sets of transceiver configurations. Later you can quickly recall one of these, depending on the operations you have in mind or the operating environment.
PROGRAMMABLE INFORMATION
8The following settings can be separately stored for band A and B:
VFO frequency | VFO mode |
|
|
Memory Recall mode | Call Channel mode |
|
|
Offset direction | Offset frequency |
|
|
Reverse ON | Automatic Simplex Check |
|
|
Tone ON | Tone frequency |
|
|
CTCSS ON | CTCSS frequency |
|
|
DCS ON | DCS code |
|
|
Upper frequency limit | Lower frequency limit |
(for Programmable VFO) | (for Programmable VFO) |
Frequency step size | FM/ AM mode |
|
|
The following settings are shared by both band A and B:
TX band | Control band |
|
|
Transmit output power | Auto Band Change |
|
|
Display Dimmer | Many of the menu selections 1 |
|
|
1The menu items listed below will not be stored:
•
•
•
•
•
•
40