Kenwood TM-V708A instruction manual Display Dimmer, Display Contrast Adjust, Auto Dimmer Change

DISPLAY DIMMER

You can manually change the display illumination to suit the lighting conditions where you are operating.

1Press [F], [DIM].

•The current illumination level appears and blinks. The default is level 1.

DISPLAY CONTRAST ADJUST

The display visibility changes depending on the ambient conditions, for example between daytime and night. When you find the display is not clear, use this function to select the optimum display contrast.

Access Menu 1–1–2 (CONTRAST) and select from levels 1 to 16. The default is level 8.

2 Press [c]/ [d] to select from 5 levels, including OFF.

3 Press [OK] to complete the setting.	Note: The display contrast may be affected by a change in
	temperature. Adjust the contrast as necessary.
Note: Selecting OFF automatically switches Auto Dimmer Change
ON.

AUTO DIMMER CHANGE

This function increases the display intensity one step brighter for approximately 5 seconds when you press a front panel key or Mic key, or turn the Tuning control. No change occurs if you have selected the brightest level. Access Menu 1–1–4 (AUTO DIMMER) and select “ON”.

POSITIVE/ NEGATIVE REVERSAL
You can change the display status between Negative	14
and Positive (default) using Menu 1–1–3 (REVERSE
MODE).

63