Kenwood TM-V708A Basic Transceiver Modes, VFO mode, Memory Recall mode, Menu mode, page

BASIC TRANSCEIVER MODES

This section introduces you to the basic modes you can select.

VFO mode

Press [VFO] to select. You can change the operating frequency using the Tuning control or Mic [UP]/ [DWN].

TM-V708

Memory Recall mode

Press [MR] to select. You can change memory channels using the Tuning control or Mic [UP]/ [DWN], where you stored frequencies and related data. Refer to “MEMORY CHANNELS” {page 33}.

TM-V708

Programmable Memory (PM) mode

Press [PM] to select. You can select the transceiver environment that you stored in PM channels, by pressing

[1]to [5]. Refer to “PROGRAMMABLE MEMORY (PM)”

{page 40}.	3
		TM￿-V708

Menu mode

Press [MNU] to select. You can change Menu Nos. using the Tuning control or [c]/ [d]. Refer to “MENU SETUP” {page 22}.

15