Kenwood TM-V708A Transceiver Lock, All-Controllock, S-Metersquelch, PWR switch, F, MHz

TRANSCEIVER LOCK

Transceiver Lock is suitable for a typical mobile installation where you alter most functions with your microphone. This Lock disables all functions excluding the following:

PWR switch	[F]	[F], [MHz]
SQL controls	VOL controls	Mic keys

Press [F], [MHz] to switch this function ON (or OFF).

• “LOCK” appears when this function is ON.

ALL-CONTROL LOCK

All-control Lock is ideal when you have no plans to transmit but you want to monitor a specific frequency. This Lock disables all functions excluding power ON/ OFF and All-control Lock ON/OFF.

After switching Transceiver Lock ON, switch the transceiver OFF, then press [MHz]+ POWER ON to switch this function ON (or OFF).

• “ALL LOCK” appears when this function is ON.

S-METER SQUELCH

S-meter Squelch causes the squelch to open only when a signal with the same or greater strength than the S-meter setting is received. This function relieves you from constantly resetting the squelch when receiving weak stations in which you have no interest.

1Select your desired band.

2Press [MNU] to enter Menu mode.

3Select Menu 1–3–2 (S-METER SQUELCH), then press [OK].

4Press [c]/ [d] to switch this function ON (or OFF).

5Press [OK] to complete the setting.

6 Press [MNU] to exit Menu mode. 14

• The S-meter setting segments appear.

7To select the desired S-meter setting, turn the left (band A) or right (band B) SQL control.

65