OPERATING BASICS
SWITCHING THE POWER ON/OFF
1Switch the DC power supply ON.
• If operating mobile, skip this step.
2Press the PWR switch to switch the transceiver ON.
3To switch the transceiver OFF, press the PWR switch again.
4If operating as a fixed station, switch the DC power supply OFF.
•You may skip step 3. After switching the transceiver ON, you can switch it OFF or ON using only the power switch of the DC power supply.
ADJUSTING THE VOLUME
Turn the VOL control clockwise to increase the audio level and counterclockwise to decrease the audio level.
4
•If background noise is inaudible because of the Squelch function, press the Mic PF key assigned the Monitor function {page 60}, then adjust the VOL control. Press the PF key again to cancel the Monitor function.
SELECTING A BAND
Press the left [BAND SEL] to select band A, or the right [BAND SEL] to select band B.
• “PTT” moves to the selected band.
• For band A and B, see page 17.
19