■Replacing Fuses

If a fuse blows, determine the cause, then correct the problem. After the problem is resolved, replace the fuse. If newly installed fuses continue to blow, disconnect the power cable and contact your authorized KENWOOD dealer or an authorized KENWOOD service center for assistance.

 

Fuse Location

Fuse Current Rating

 

 

 

 

 

 

Transceiver

15 A

 

 

 

 

 

 

Supplied Accessory

20 A

 

DC Power Cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Only use fuses of the specified type and rating; otherwise the transceiver could be damaged.

Note: If you use the transceiver for a long period when the vehicle battery is not fully charged or when the engine is OFF, the battery may become discharged and will not have sufficient reserves to start the vehicle. Avoid using the transceiver under these conditions.

ANTENNA CONNECTION

 

Before operating, you must first install an efficient,

1

well-tuned antenna. Successful transceiver operation

 

will depend largely on the type of antenna and its correct

 

installation. The transceiver can give excellent results if

 

the antenna system and its installation are given careful

 

attention.

 

Use a 50 Ω impedance antenna to match the transceiver

 

input impedance. Also use a low-loss coaxial feed line

 

that has a characteristic impedance of 50 Ω. Coupling

 

the antenna to the transceiver via feed lines having an

 

impedance other than 50 Ω reduces the efficiency of the

 

antenna system, and can cause interference to nearby

 

broadcast television receivers, radio receivers, and other

 

electronic equipment.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

◆Transmitting without first connecting an antenna or other matched load may damage the transceiver. Always connect an antenna to the transceiver before transmitting.

◆All fixed stations should be equipped with a lightning arrester to reduce the risk of fire, electric shock, and transceiver damage.

Antenna connector

To antenna

Feed line connector

7

Page 12 Page 14
Page 13
Image 13
Kenwood TM-V708A instruction manual Antenna Connection, Replacing Fuses, Fuse Location Fuse Current Rating
Page 12 Page 14

TM-V708A specifications

The Kenwood TM-V708A is a versatile and powerful dual-band transceiver that caters to amateur radio enthusiasts seeking advanced communication capabilities. Designed for operation in the 144 MHz and 440 MHz bands, this mobile radio provides exceptional performance in various modes, making it ideal for both casual users and serious operators alike.

One of the standout features of the TM-V708A is its ability to operate in both VHF and UHF frequencies simultaneous, enabling users to monitor multiple channels at once. With a powerful output of up to 50 watts on VHF and 35 watts on UHF, the TM-V708A ensures strong, clear signals that can reach distant stations. The user-friendly interface includes a large display that provides clear readings of the frequency and other operational parameters, enhancing the overall experience for operators.

The Kenwood TM-V708A is equipped with advanced digital signal processing (DSP) technology. This feature minimizes background noise, ensuring that voice communications remain crystal clear even in challenging conditions. The built-in CTCSS and DCS capabilities add further functionality, allowing for selective calling and improved privacy during conversations.

This transceiver comes with a wide range of operating modes. It supports FM, AM, and SSB, providing flexibility based on operator preference and environmental conditions. Furthermore, the inclusion of APRS (Automatic Packet Reporting System) capabilities allows for real-time tracking and position reporting, making it an excellent tool for emergencies and outdoor adventures.

Another notable characteristic is its built-in memory. The TM-V708A can store a substantial number of memory channels, allowing users to quickly access their preferred frequencies. Additionally, the dual-receive function permits the monitoring of two different frequencies simultaneously, providing seamless communication in dynamic environments.

For enhanced usability, the TM-V708A includes multiple connectivity options. It features a variety of ports for connecting external equipment, allowing operators to customize their setup according to their specific needs. The unit also balances robust performance with portability, making it suitable for both mobile and stationary use.

In summary, the Kenwood TM-V708A is a powerful and feature-rich transceiver that combines advanced technologies and user-friendly design. Its dual-band capabilities, robust power output, and extensive operational modes make it an invaluable tool for amateur radio operators seeking to enhance their communication experience. Whether for casual chatting or emergency response, the TM-V708A stands as a premier choice in the market.
Top Page Image Contents