![STORING IN PM CHANNELS](/images/new-backgrounds/27821/2782195x1.webp)
STORING IN PM CHANNELS
1Confirm that the following conditions have been satisfied:
•The transceiver is in reception mode.
•Scan is not being used.
•Microphone Control is OFF.
2Configure the transceiver with your desired settings.
• For the items that can be stored, see page 40.
3 Press [F], [P.IN].
8• The PM channel numbers 1 to 5 appear and blink at the bottom of the display.
4Press [1] to [5] corresponding to your desired PM channel.
•The settings listed in page 40 are stored in the PM channel.
RECALLING A PM CHANNEL
1Press [PM].
•The PM channel numbers 1 to 5 appear at the bottom of the display.
2Press [1] to [5] corresponding to your desired PM channel.
•The contents of the selected channel are recalled.
•The current PM channel number appears at the upper right corner. “s” before “PM” indicates that Auto PM Store mode {page 43} has been selected.
•To exit PM Recall mode, press [PM], [OFF].
Note: You cannot recall a PM channel while transmitting.
42