Kenwood TM-V708A Installing Options, INSTALLING THE PG-4XEXTENSION CABLE KIT, 3cm Approx

INSTALLING OPTIONS

INSTALLING THE VS-3 VOICE SYNTHESIZER UNIT

Always switch the power OFF and unplug the DC power cable first.

1Remove the 6 screws from the lower cover of the main unit.

INSTALLING THE PG-4X EXTENSION CABLE KIT

The PG-4X kit is available to extend the various connection cables. For cable connections, see page 80. With two PG-4X kits, you can extend the cables to the maximum length.

The PG-4X kit also includes noise filters, modular plug adapter cushions, and cable clamps. The following diagrams illustrate how to install these accessories.

.3cm
Approx	From front panel

2Hold the VS-3 unit with the component side facing up, then insert the VS-3 connector into the corresponding transceiver connector.

• The component side must not face downward.

Component side

.3cm

Approx

Noise filter

From microphone

3Replace the lower cover (6 screws).

Modular plug adapter

21

Cushion

79