Westinghouse WSF6602 Loading Cutlery And Dishes, Filling with rinse aid, Helpful Hints And Tips

Models: WSF6602

1 24
Download 24 pages 2.07 Kb
Page 7
Image 7
Filling with rinse aid

Rinse aid makes it possible to dry the dishes without streaks and stains.

Rinse aid is automatically added during the last rinsing phase.

Follow these steps to fill the rinse aid dis- penser:

Filling with rinse aid

1.Press the release button 6 to open the lid 5 of the rinse aid dispenser.

2.Fill the rinse aid dispenser 3 with rinse aid. The mark 'max' shows the maxi- mum level.

3.Remove the spilled rinse aid with an ab- sorbent cloth to prevent too much foam during the washing program.

4.Close the rinse aid dispenser. Press the lid until it locks into position.

ADJUSTING THE RINSE AID DOSAGE

Factory set: position 3.

You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highest dosage).

Turn the rinse aid selector 4 to increase or reduce the dosage.

westinghouse 7

Wash hands to remove any residue of rinse aid from skin.

USE OF COMBI DETERGENT TABLETS

These products are detergents with com- bined cleaning and rinsing functions. They can contain also other cleaning agents.

Refer to the instructions from the manufac- turer for the use of these products.

When you use tablets that contain rinse aid:

Set the lowest position for the rinse aid dosage.

Do not put rinse aid in the rinse aid dis- penser. In this condition rinse aid indica-

tor light is always on when you switch on the appliance.

.

Follow these steps if the drying results are not satisfactory or you want to use normal detergents again

1.Fill the rinse aid dispenser with rinse aid.

2.Adjust the rinse aid dosage.

LOADING CUTLERY AND DISHES

HELPFUL HINTS AND TIPS

Caution! Only use the appliance for household utensils that are suitable for dishwashers.

Do not use the appliance to clean objects that can absorb water (sponges, household cloths, etc.).

Before you load cutlery and dishes:

Remove all remains of food and debris.

Soften burnt remains of food.

While you load cutlery and dishes:

Load hollow items (e.g. cups, glasses and pans) with the opening down.

Make sure that water does not collect in the container or in a deep base.

Make sure that cutlery and dishes do not lie inside one another.

Make sure that cutlery and dishes do not cover other cutlery and dishes.

Make sure that glasses do not touch other glasses.

Put small objects in the cutlery basket.

Plastic items and pans with non-stick coatings can retain water droplets. Plas- tic items do not dry as well as porcelain and steel items.

Put light items in the upper basket. Make sure that the items do not move.

Caution! Make sure that the spray arms can move freely before you start a washing program.

Warning! Always close the door after you load or unload the appliance. An open door can be dangerous.

LOADING THE LOWER BASKET

Put saucepans, lids, dishes, salad bowls and cutlery in the lower basket.

The rows of prongs in the lower basket can be adjusted flat to load large dishes, pots, pans and bowls.

Page 7
Image 7
Westinghouse WSF6602 user manual Loading Cutlery And Dishes, Filling with rinse aid, Adjusting The Rinse Aid Dosage