14westinghouse
CARE AND CLEANING
TO REMOVE AND CLEAN THE FILTERS
Warning! Switch the appliance off before you carry out any cleaning operation.
Dirty filters decrease the washing results. Although the maintenance is very low with these filters, we recommend that you regu- larly check the filters and clean them if nec- essary.
1.To remove filter (A), turn it counterclock- wise and remove it out from filter (B).
B
A
2.Filter (A) has 2 parts. To disassemble the filter, pull them apart.
3.Thoroughly clean the parts under run- ning water.
4.Put the 2 parts of the filter (A) together and push. Make sure that they assem- ble correctly in each other.
5.Remove filter (B).
6.Thoroughly clean filter (B) under running water.
7.Put filter (B) to its initial position. Make sure that it assembles correctly under the two guides (C).
C
8.Put filter (A) into position in filter (B) and turn it clockwise until it locks.
CLEANING THE SPRAY ARMS
Do not remove the spray arms.
If the holes in the spray arms become clog- ged, remove remaining parts of soil with a thin pointed object.
EXTERNAL CLEANING
Clean the external surfaces of the appliance and control panel with a damp soft cloth. Only use neutral detergents. Do not use abrasive products, scouring pads or sol- vents (e.g. acetone).
INTERNAL CLEANING
We recommend, every 3 months to run a washing program for heavily soiled dishes. Use detergent, but do not put dishes in the appliance.
WHEN THE APPLIANCE IS NOT TO BE USED FOR A LONG PERIOD
1.Disconnect the mains plug from the mains socket.
2.Close the water tap.
3.Leave the door open to prevent un- pleasant smells.
4.Keep the inner side of the appliance clean.
