Operations Common to Each Mode
English
Setting LOW PASS FILTER
∗The factory default setting is “LPF 120”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “SW LPF”.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:
REAR ➜ LPF 50 ➜ LPF 80 ➜ LPF 120
4.Press the [T] button to return to the previous mode.
Dimmer control
You can setting the dimmer control on or off.
∗The factory default setting is “ON”.
Setting the method for title scroll
Set how to scroll in
∗The factory default setting is “ON”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “SCROLL”.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise and select “ON” or “OFF”.
●ON:
To scroll automatically.
●OFF:
To scroll just 1 time when the title was changed or the title key was pressed.
4.Press the [T] button to return to the previous mode.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “DIM- MER”.
3.Turn the [ROTARY] knob clockwise to “ON” or counterclockwise to “OFF”.
4.Press the [T] button to return to the previous mode.
Adjusting the display contrast
You can adjust the display contrast to match the angle of installation of the unit.
∗The factory default setting is “5”. (Adjustment level:1to 8)
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “CON- TRAST”.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise to adjust the contrast.
4.Press the [T] button to return to the previous mode.
AUX function
This system has an external input jack so you can listen to sounds and music from external devices connected to this unit.
Selecting AUX IN sensitivity
Make the following settings to select the sensi- tivity when sounds from external devices con- nected to this unit are difficult to hear even after adjusting the volume.
∗The factory default setting is “MID”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “AUX SENS”.
3.Turn the [ROTARY] knob clockwise or coun- terclockwise as needed and select from “HIGH”, “MID” or “LOW”.
4.Press the [T] button to return to the previous mode.
Setting the clock
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “CLOCK”.
3.Press the [] button.
18 DXZ535