HP 7000 dl Router manual Spanning-tree pathcost method short long

SROS Command Line Interface Reference Guide Global Configuration Mode Command Set

spanning-tree pathcost method [short long]

Use the spanning-tree pathcost command to select a short or long pathcost method used by the spanning-tree protocol.

Syntax Description

short	Choose a short pathcost method.
long	Choose a long pathcost method.

Default Values

By default, this is set to short.

Command Modes

(config)# Global Configuration Mode required

Usage Examples

The following example designates the spanning-tree protocol to use a long pathcost method:

(config)#spanning-tree pathcost method long

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 352