HP 7000 dl Router manual Client-name name

SROS Command Line Interface Reference Guide DHCP Pool Command Set

client-name <name>

Use the client-namecommand to specify the name of a Dynamic Host Configuration Protocol (DHCP) client. Use the no form of this command to remove the configured client name.

Syntax Description

<name>	Alphanumeric string (up to 32 characters in length) used to identify the DHCP
	client (example is client1).
Note	The specified client name should not contain the domain name.

Default Values

By default, there are no specified client names.

Command Modes

(config-dhcp)# DHCP Pool

Usage Examples

The following example specifies a client name of myclient:

(config)#ip dhcp-server pool MyPool (config-dhcp)#client-name myclient

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 358