HP 7000 dl Router manual Clear arp-cache, Enable #clear arp-cache

SROS Command Line Interface Reference Guide Enable Mode Command Set

clear arp-cache

Use the clear arp-cachecommand to remove all dynamic entries from the Address Resolution Protocol (ARP) cache table.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following example removes all dynamic entries from the ARP cache:

>enable

#clear arp-cache

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 23