HP 7000 dl Router manual Show radius statistics, #show radius statistics

SROS Command Line Interface Reference Guide Enable Mode Command Set

show radius statistics

Use the show radius statistics command to display various statistics from the RADIUS subsystem. These statistics include number of packets sent, number of invalid responses, number of timeouts, average packet delay, and maximum packet delay. Statistics are shown for both authentication and accounting packets.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

# Enable Command Mode

Usage Examples

The following is an example output using the show radius statistics command:

#show radius statistics
	Auth.	Acct.
Number of packets sent:	3	0
Number of invalid responses:	0	0
Number of timeouts:	0	0
Average delay:	2 ms	0 ms
Maximum delay:	3 ms	0 ms

show running-config interface tunnel <id> verbose

5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 184